Shop 2 / 15 Tower Court,
Noble Park VIC 3174
Mon-Fri
8 AM - 5 PM
Call 0435 025 652,
0422 658 311
mglassr@gmail.com

4 Major Points to Determine a Failed Double Glazing

4 Major Points to Determine a Failed Double Glazing

Is your shiny double glazed windows have withered away and it all went unnoticed? So it is important to keep a watch at your light balancing windows to make sure proper protection and safety. You can seek help from the reputed commercial glazing company for repairing your old windows. Below are the few possible problems that demands window repairing and effective solutions for the respective problem.

When you are planning to replace skylights, then first you need to know which things are causing trouble to it. You should look for:

  • Leaks
  • Cracks, holes or chips
  • Draughts
  • Condensation between glass panes

You may think that these are common issues, but these little issues can decide your window life. Now, how do you know the situation demands repairing or replacing the window? Well, you can only plan this when you know the above points in details

1. Water Leaks:

This water leak may cause due to leaking seal or a blocked drainage section. If the leakage is due to blocked drainage, a simple cleaning can recover the problem. If there is a leaking window seal, then it is recommended to consult with a local glazing company in Melbourne for a quick replacement.Another possible situation is gaps built around the frame edges which results in failed sealants, if the windows are under the guarantee period then consultant the firm regarding the issue or you need to replace it at the earliest state otherwise water may enter into the room.

2. Cracks, Holes or Chips:

If your window glass is scratched or cracked, it will gradually decrease its effectiveness in protecting your house. You can correct these changes by repairing the damage as quickly as possible. If the crack is deep then it is needed to replace with the new piece of window.

3. Draught:

Draught is nothing but broken seals in or around your window. If the draught is in the area between the window frames and bricks, it means that the sealant has possibly failed. You can fix the problem by filling up the gap between the frames and the wall. The draught may also cause due to worn out weather.

4. Condensation:

Condensation is normally on the outer side of your window. But, if this condensation case inside the room, then your window has lost its efficiency. In this situation there is no need to replace or repair the window, a dehumidifier is all that you need to overcome the problem.
Once you are aware about the common problems that can result in failed glazing, you can easily repair or replace them as per the situation demands.

Leave a Reply